Description
Description
Provides easy monitoring and troubleshooting of pneumatic control systems.
Typical applications include:
- Compressed air system optimization monitoring to reveal cost savings.
- Compressor and motor monitoring.
Key Features:
- Quick release pressure fitting to allow a fast connection
- All system parameters (Temperature, RH, Pressure and AC current) recorded on one Datalogger.
- 1 second sampling rate and sufficient memory to log operating parameters over a complete operating cycle (typically 7 days)
- Able to connect to a wide variety of external meters and transducers (Flow, High pressure etc.) for added data.
- Can be calibrated to NIST standards
Specifications
- Battery 1.6 AH 3.6V Lithium
- Baud Rate 460K800 (<2.5 min Backup)
- Case Material Noryl® Plastic
- Channel Accuracy - Current AEMC CT: ±5A over 0-250A up to 500A
- Channel Accuracy - Pressure ±0.7 PSI (±0.5 Pa)
- Channel Accuracy - Process ±0.5% FS + Transducer
- Channel Accuracy - RH ±3% RH over 10 to 90% RH
- Channel Accuracy - Temprature ±0.3°C over 0 to 70°C (±0.5°F over 32 to 158 to 158°F)
- Clock Accuracy ±1 sec over 7 days
- Dimensions 110 x 70 x 20 mm (4.3 x 2.6 x 0.8 in)
- Input Impedance CH3: I:125Ώ, V:> 100KΏ
- Input Mode Dependent CH4-7: I:400Ώ, V:> 100kΏ
- interface Cable IC-102 USB to Logger
- Memory Size 6MB (5 channels at 1 second for 7 days)
- Operating Limits -40 to 70°C (-40 to 158°F)
- Recording Mode Stop on Full or First-In-First-Out
- Resolution 12 bit Converter 1 part in 4096
- Sampling Method Average or Spot Reading
- Software Version TrendReader 3.09 or Later
- Weight 120g (4 oz)
