Description
Flue gas probe
Different shaft lengths available : 180, 300 and 750 mm probes and 1 m and 1.5 m probes. 180 mm probe includes 2 m of dual hose with water trap and adjustable fixing cone. All other probes include 3 m of dual hose with water trap and adjustable fixing cone.
Flexible probe
Allows user to insert the probe into flues and pipes that are hard to reach and in tight locations where the typical straight rigid probe is difficult to use. - Bends up to 90° with a radius of 8 cm - Easy return to straight position - 180 mm flexible probe shaft length- 2 m dual hose with water trap
Draft probe
Allows user to measure the draft into the flue/stack. It allows draft and combustion analysis to be measured simultaneously.
Smart air temperature probe
Allows user to measure the incoming air temperature. Sensor type: K thermocouple. Stainless steel contact tip, 100 mm length and Ø4.5 mm. With a 2 m coiled cable.
Pt100 temperature probe
Allows user to measure the incoming air temperature. Sensor type: Pt100. Stainless steel contact type, 100 mm length and Ø4.5 mm. With a 2 m coiled cable.
CO probe
Allows user to measure the ambient CO. Sensor type: electrochemical.
CO2 probe
Allows user to measure the ambient CO2 . Sensor type: NDIR.
The CO and CO2 probes are compatible with the Si-CA 130 and 230 without modification of the analysers. They are also compatible with the Si-CA 030, but may require the Si-CA 030 to be returned to the factory in order to install an external input for these two probes.
