Ultrasonic Leak Detectors

ULD-405 / 410 / 420

When equipment begins to fail due to an air or gas leak or vibration, or electrical discharge, the leakage point emits an ultrasonic sound wave that is above the natural range of human hearing. The ULD-400 series Ultrasonic Leak Detector converts this ultrasonic sound into a signal that can be used to pinpoint the exact location of the equipment failure.

Modele

  • Ultrasonic Leak Detectors - ULD-405

    Receiver Earbuds (for use with hard hat) PB-1 Power Parabola TEA-1 Flexible Tubing Adapter TE-1 Tubular Extension Soft Carrying Case 4 x AA Batteries

  • Ultrasonic Leak Detectors - ULD-410

    Receiver Headphones Earbuds (for use with hard hat) PB-1 Power Parabola TEA-1 Flexible Tubing Adapter TE-1 Tubular Extension Hard Carrying Case 4 x AA Batteries

  • Ultrasonic Leak Detectors - ULD-420

    Receiver Transmitter Headphones Earbuds (for use with hard hat) PB-1 Power Parabola TEA-1 Flexible Tubing Adapter TE-1 Tubular Extension Hard Carrying Case 4 x AA Batteries 2 x AAA Batteries

  • Ultrasonic Leak Detectors - ULD-400-T

    ULD-400-T Transmitter 2 x AAA Batteries

Description

Find air leaks that drop down performance and incur additional power consumption, requiring more energy to compensate lost pressure. See the strength of the leak clearly on the large LCD bargraph and identify the source of the leak by listening to the converted audible sound emitted via the earbuds. When working in unpressurized systems or the pressure is not sufficient enough to detect or verify a leak with the Receiver alone use the Transmitter.

ULD-405

  • Adjustable Receiver sensitivity for accurate leak pinpointing
  • 20 kHz to 90 kHz frequency range: optimal range for detecting a variety of leakage events
  • 2.5” LCD display with bargraph
  • Parabola accessory directs the ultrasound towards the sensor
  • Detachable Tubular Extension provides additional reach in hard to reach areas

ULD-410

  • Three Receiver filters to remove main noise frequencies in noisy environments
  • Adjustable Receiver sensitivity for accurate leak pinpointing
  • 20 kHz to 90 kHz frequency range: optimal range for detecting a variety of leakage events
  • 2.5” LCD display with bargraph
  • Quality headphones to help identify the source of the leak
  • Parabola accessory directs the ultrasound towards the sensor
  • Detachable Tubular Extension provides additional reach in hard to reach areas

ULD-420

  • Transmitter generates an ultrasonic signal when working in unpressurized systems
  • Three Receiver filters to remove main noise frequencies in noisy environments
  • Adjustable Receiver sensitivity for accurate leak pinpointing
  • 20 kHz to 90 kHz frequency range: optimal range for detecting a variety of leakage events
  • 2.5” LCD display with bargraph
  • Quality headphones to help identify the source of the leak
  • Parabola accessory directs the ultrasound towards the sensor
  • Detachable Tubular Extension provides additional reach in hard to reach areas

Specifications

ULD-400-R ReceiverULD-400-T Transmitter
Sensitivity AdjustmentYesN/A
Volume AdjustmentYesN/A
Signal Level AdjustmentN/AYes
Earphone Jack (3.5 mm)YesN/A
Display SizeLCD 2.5 in (6.35 cm)N/A
Display Dimensions1.45 x 1.93 in (36.72 x 48.96 mm)N/A
Display Resolution240(RGB) x 320 pixelsN/A
Display TypeTFT-LCD (262 K)N/A
Display ColorTrue, 16bit/colorN/A
Frequency Range20 kHz to 90 kHzTypical 40 kHz squarewave
Filter±5 KHz of main noise frequency, up to three filtersN/A
Power Supply4 x 1.5 V AA (LR6) alkaline batteries2 x 1.5 V AAA (LR03) alkaline batteries
Power Consumption (typical)75 mA33 mA
Battery Life (typical)105 hours (Alkaline)60 hours (Alkaline)
Low Battery IndicationYes (Red LED)
WeightApprox. 0.518 lb (0.235 kg)Approx. 0.335 lb (0.152 kg)
Dimensions7.547 x 2.984 x 1.791 in
(183 x 75 x 43 mm)
5.295 x 2.559 x 1.326 in
(137 x 65 x 33 mm)
APO function60 minutes when in idle
Operating Temperature-4 °F to 122 °F (-20 °C to 50 °C)
Storage Temperature-4 °F to 158 °F (-20 °C to 70 °C)
Operating Humidity<80% RH
Pollution Degree2
ProtectionIP40
Certifications
Electromagnetic Compatibility (EMC)EN 61326-1
Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) [1]
[1] This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes.

 

Additional information

Model

ULD-400-T, ULD-405, ULD-410, ULD-420