Description
The Sauermann Si-CPE320 is an evolution of the KIMO CPE 310.
Equipped with the same technologies as the Si-C320, this panelmounted version provides state-of-the-art reliability and accuracy.
In addition, measurements can be recorded and downloaded via the Sauermann Control application/software.
Si-CPE320: Optional wireless communication module
Si-CPE320-W: Integrated wireless communication module
- 1 x input for external probe
- 3 x analogue outputs
- Graphic touch display
- IP 66, VHP resistant (Vaporized hydrogen peroxide)
- Outputs diagnostic
- Possibility to edit the channel names
MEASUREMENT DETAILS
- Units: ACH, inH₂O, inWc, °Ctf, °F, °Ftf, °C, % RH, °Ctd, °Ftw, Pa, kPa, g/m³, g/kg, kj/kg, mbar, m³/h, mmH₂O, daPa, cfm
- Alarm: Buzzer (60 dB at 10 cm)
TECHNICAL DETAILS
- Parameters
Absolute humidity
Air Change Rate
Air velocity
Airflow
CO
VOC
CO₂
Dew point
Differential pressure
Enthalpy
Frost point
Mixing Ratio
Relative humidity
Temperature
Wet-bulb temperature
- Displays: Graphic touch display
- IP Protection: IP 66, VHP resistant (Vaporized hydrogen peroxide)
- Standards
2015/863 EU (RoHS 3)
UKCA
2012/19/EU WEEE
2014/30/EU EMC
2014/35/EU Low Voltage
2014/53/EU RED - Wireless connection: 1
- Power supply : 24 VAC / VDC ±10%
- Outputs : 3 x 0/4-20 mA or 3 x 0-5/10 V (4 wires)
- Ethernet communication: No
- ModBus network: Yes
Supplied with
- 1 Si-CPE320 multifunction panel transmitter
- 1 integrated high accuracy differential pressure sensor (-250 to 250 Pa / -1.0 to 1.0 inH₂O)
- 3 analogue outputs
- 1 RS485 interface with ModBus RTU protocol
- 1 input for probes
- 1 adjusting certificate
- Terminal blocks for power connection, and output connections
- 1 front pressure connector cap with a pierced hole in the middle
- 1 silicone cap for closing a rear pressure connector
- 1 protective cap for frontal interface connection
- 1 protective cap for the external probe connector
- Si-CPE320: Optional wireless communication module
- Si-CPE320-W: Integrated wireless communication module
