Categories
- All products
- Accessories
- Air conditioning
- Automation
- Calibration
- Control
- Data Loggers
- Dimensionnal
- Electrical
- Flow
- Gas
- Gas and Combustion analysers
- Gas Detectors
- Heating / Refrigeration
- Humidity
- Level
- Luminosity
- Measuring devices
- Pressure
- Sound levels
- Tachymetry
- Temperature
- Uncategorized
- Weather
Read moreR8090
This sound calibrator generates a stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter. The R8090 is compatible with all 1/2" diameter microphones.
Read moreSM-CAL1
The Amprobe SM-CAL1 is a sound meter calibrator with two output levels of 94 dB and 114 dB. The calibrator generates these fixed sound level signals for calibration of sound level meters. The unit comes with a ½” adapter installed to accommodate sound meters and microphones with ½ diameter.
Read more753
The 753 performs the work of several tools: generating, simulating and measuring pressure, temperature and electrical signals in a single, robust and handy device. You will be won over by its new graphic display, its Li-Ion battery that provides greater autonomy, its USB port and the new accessories that come with it.
- Read more
754
Whether you're calibrating instruments, troubleshooting a problem, or running routine maintenance, the Fluke 754 with HART® communication can help you get the job done faster. It does so many different tasks, so quickly and so well, it's the only process calibrator you need to carry. This rugged, reliable integrated communicating calibrator is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation.
- Read more
GP 500
Intended for metrology experts, a pressure generator allows to calibrate measurement instruments in laboratory or on-site. The Kimo GP 500 is ideal for adjustment and dynamic pressure measurement. It provides a measurement range from -2,500 to +2,500 Pa (GP 500-1) or from -10,000 to +10,000 Pa (GP 500-2).
Read moreHygroGen 2
On-site and In-Lab Humidity and Temperature Probe Calibration
Read moreGH 500
Intended for metrology experts, a hygrometry generator allows to calibrate hygrometric measurement instruments in laboratory or on-site. The Kimo GH 500 is ideal for instruments adjustment and calibration in laboratory or on-site. It provides a measurement range from 5 to 95 %RH and from -20 to +80°C.
- Read more
1523
You need accuracy for compliance, product yields, energy savings, and consistent results. The 1523 uses current reversal, a technique used in high-end instruments that eliminates thermal EMFs, for precision temperature measurements.
- Read more
1524
You need accuracy for compliance, product yields, energy savings, and consistent results. The 1524 uses current reversal, a technique used in high-end instruments that eliminates thermal EMFs, for precision temperature measurements.
- Read more
KM20REF
The KM20REF High Accuracy Reference Thermometer is designed for checking the calibration of all types of thermometer and probe combinations.
- Read more
700G / 700RG
Designed for field pressure calibration, the Fluke 700G Series Pressure Gauge Calibrators give you the performance and durability that you have come to expect in Fluke pressure calibration products while being simple and easy-to-use.
Read more6102/7102/7103
Micro-baths, liquid. 3 models covering 3 ranges from -30 to +200°C
Read moreR5850
This portable and easy-to-use calibrator provides accurate measurements and calibrations for a wide range of process signals, including voltage, current, resistance, frequency, and temperature.
- Read more
725
With the Fluke 725 Multifunction Process Calibrator you can easily source and measure almost any process parameter and test almost any process device. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
- Read more
726
The Fluke 726 is a precise and powerful, yet easy-to-use, field calibrator. It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves, and to test and calibrate transmitters. The 726 interprets results without the help of a calculator and stores measurement data for later analysis.
Read more5627A
5627A probes have a temperature range up to 420 °C and an accuracy as good as ± 0.025 °C. They come in three different lengths. (Both six- and nine-inch models cover –200 °C to 300 °C.) Each precision thermometer is shipped with its ITS-90 coefficients and a calibration table in 1 °C increments.
Read morenVision
nVision Reference Pressure Recorder: The Ultimate Solution for Precision, Durability, and Portability
Read more5615
For years, you’ve relied on our 5612, 5613, and 5614 Secondary Reference Probes. These field-durable, lab-accurate PRTs have been replaced by the 5615, which comes with a NVLAP accredited calibration.
Read more5626/5628
Fluke Calibration's high-temp secondary standards fill the gap between affordable, but temperature-limited secondary PRTs (platinum resistance thermometers) and more expensive, highly accurate SPRTs (standard platinum resistance thermometers).
- Read more
1551a
Finally a digital replacement for your mercury thermometers! Accurate and repeatable to ±0.05°C of its full range, the Stik 1551A thermometer is the new “gold standard” in industrial temperature calibration. Whether you’re working outdoors in potentially explosive gas environments or on the shop floor of a factory, this portable, intrinsically safe, battery-powered reference thermometer is designed to go anywhere you go.
- Read more
KM820/VKIT
The KM820/VKIT Validator Calibration Check Kit is used to check the accuracy of infrared and other contact thermometers.
