Categories

Brand

Qty per page

  • Duct Leak Tester

    PAN231 - pANDA SYSTEM

    Positive and Negative Duct Accreditation System

    The Positive and Negative Duct Accreditation (PANDA) System Model PAN231 provides contractors, commissioning engineers, and research and development technicians with best-in-class choice of test equipment to quantify air leakage in ductwork and other areas as well as the ability to measure the performance of ducted systems.

    Read more
  • Airflow measuring blades

    DEbimo

    Kimo’s DEBIMO measuring blades are a simple and cost effective method of providing permanent air flow measurement.

    Read more
  • Shortridge

    ADM-860C

    AIR FLOW• VELOCITY • PRESSURE • TEMPERATURE

    The ADM-860C AirData Multimeters include an RS232 communication port, which allows serial output to a printer or computer.

    Read more
  • Shortridge

    ADM-870C

    AIR FLOW• VELOCITY • PRESSURE • TEMPERATURE

    The ADM-870C AirData Multimeter is designed specifically for applications with very demanding air distribution requirements.
    Features an RS232 Communications Port, which allows the user to download readings to a printer or computer.

    Read more
  • Shortridge

    ADM-880C

    AIR FLOW• VELOCITY • PRESSURE • TEMPERATURE

    The ADM-880C AirData Multimeter stores 2000 readings, along with the time and date, in up to 25 memory groups.
    Each reading may be recalled - along with the average, sum, minimum, maximum, and standard deviations of the readings for each mode within each group.

    Read more
  • Airflow cones

    Si-K25 and Si-K85

    The Si-K25 and Si-K85 are airflow measurement cones designed for 100 mm diameter vane anemometers.

    Read more
  • Hotwire thermo-anemometer

    VT 110 / VT 115

    Kimo’s VT 110 / 115 is perfect for measuring airflow, air velocity and temperature with its hot wire probe.

    Read more
  • Velometer Mulfifunction Thermal Anemometer

    AVM440

    Measures velocity, temperature, relative humidity / calculates flow, wet bulb and dew point temperature with a straight, telescopic probe / data logging.

    Read more
  • Rotating Vane Anemometer

    LV130

    The Kimo LV 130 precisely measures air velocity and ambient temperature with a rotating vane probe.

    Read more
  • Thermo-anemometer with integrated vane probe

    LV 110 / 111 / 117

    The Kimo LV 110 / 111 / 117 displays velocity and temperature measurements.

    Read more
  • Vane Anemometer

    RVA 501

    The Alnor Rotating Vane RVA501 is a handheld digital rotating vane anemometer that measures air velocity, air volume, and temperature in imperial or metric units. The four-inch (100mm) head automatically averages velocity and volume readings, making the RVA501 an essential tool for measuring unevenly distributed or fluctuating flows through heating and cooling coils, diffusers, grilles, and filters.

    Read more
  • Rotating Vane Anemometer

    RVA801

    The Alnor Rotating Vane RVA801 is a light weight, robust, and simple to use rotating vane anemometer that provides accurate and reliable readings every time. The RVA801 measures air velocity, air volume and temperature using simple button operation and displays readings in metric or imperial mode from 50–6000 ft/min (0.25–30 m/s).

    Read more
  • Multi-probes Thermo-hygrometer-anemometer

    VT 210

    Specially designed for the control of ventilation systems, the VT 210 allows users to measure the air velocity, the airflow and the temperature in ducts.

    Read more
  • Multifunction anemometer

    AMI 310

    Kimo’s AMI 310 measures simultaneous parameters including pressure, temperature (Pt100 and thermocouple), humidity, air quality (CO/CO2), air velocity, airflow (vane probes and hotwire), and tachometry.

    Read more
  • VELOCICALC Multi-Function Ventilation Meter

    VelociCalc 9600

    The 9600 VelociCalc is a portable, handheld Multi-Function Ventilation and IAQ test instrument featuring a menu-driven user interface for easy operation. The high-resolution color screen displays multiple measurements simultaneously in real-time with on-screen prompts to guide you through instrument setup and operation.

    Read more
  • Balometer Capture Hood EBT731-STA Bundle

    EBT 731-STA

    Purchasing product bundles is an excellent way to save. TSI currently offers the EBT731-STA Bundle for one low price—maximizing your savings.

    Read more
  • LoFlo Balometer Capture Hood

    6200

    Confidently and accurately measure supply or return flows from 10 to 500 cfm (17 to 850 m3/h).

    Read more
  • Balometer Analog Capture Hood

    ABT 701

    By placing an Alnor ABT Balometer Capture Hood ABT701 over a diffuser or grille, you can measure air volume in order to balance buildings and verify air flow distribution.

    Read more
  • Balometer Capture Hood

    EBT 731

    The EBT731 Balometer Capture Hood is a multipurpose electronic air balancing instrument primarily used for efficiently taking direct air volume readings at diffusers and grilles. The EBT features a detachable micromanometer which can be used with optional probes for increased flexibility in multiple measurement applications.

    Read more
  • FlowHood Kits

    8400 series

    FLOW MEASURING BASE WITH SENSING MANIFOLD

    Read more
  • Compressed Air Logger

    CAL (Compressed Air Logger)

    Provides easy monitoring and troubleshooting of pneumatic control systems.

    Read more
  • Turbine flowmeters

    G2

    The FLOMEC G2 Aluminum series is a compact, self-contained lineup of turbine meters that represent the ideal choice when accuracy and convenience are required for your application. Excellent for use with fuel and petroleum products.

    Read more
  • Liquid Flowmeters

    7000/8000

    Rugged direct reading differential pressure flow meters are design for industrial processes that include lube oil monitoring, blending, cooling and compressed air measurement.

    Read more
  • Digital flowmeter Balometer type

    Flowhood CFM-88L

    The FlowHood CFM-88L uses the electronic, digital AirData Flowmeter for direct readout at supply, return, or exhaust outlets, in cfm or liters/sec.

    BACKPRESSURE COMPENSATED AIR BALANCE SYSTEM

    Read more
  • Air Flow Meter

    DBM620

    The newly redesigned Kimo DBM 620 Air Flow Meter is a multipurpose electronic air balancing instrument primarily used for efficiently taking direct air volume readings from air vents.

     

    Read more
  • Digital Differential Pressure Manometer

    Si-PM3

    The palm-sized Sauermann Si-PM3 digital differential pressure manometer easily measures pressure.

    Read more
  • Shortridge

    Flowhood CFM-850L

    The FlowHood is a much more convenient alternative to time-consuming multiple velocity readings across air diffusers, as this instrument eliminates the need for the calculations necessary to convert the average velocity into air flow.

    BACKPRESSURE COMPENSATED AIR BALANCE SYSTEM

    Read more
  • DucTester System

    440x

    Highest pressure, super lightweight US commercial duct tester.

    Read more
  • Flow meter for compressed air and gases

    VA500

    Recording and reducing energy costs and CO2 emissions while increasing the sustainability of any compressed air system. With our VA500 it is possible to monitor your consumption and analyze your leakage flows with just one measuring device. Due to its design, it is also ideal for mobile measurements.

    Read more
  • Multifunction panel transmitter

    SI-CPE320

    For clean rooms applications, the Si-CPE320 transmitter is flush mountable to avoid disturbing the working environment. It is equipped with a highgrade stainless-steel waterproof front panel with an integrated touch screen.

    Read more
  • Hydronic Manometer

    HM 675 / HM 685

    The Hydronic Manometer is used to balance hydronic heating and cooling systems, check pump performance and set balancing valves. It can measure and display differential, high side and low side pressures simultaneously, without the need to change hose connections or instrument valve settings.

    Read more
  • Gaz Flowmeters

    7000/8000

    Rugged direct reading differential pressure flow meters are design for industrial processes that include lube oil monitoring, blending, cooling and compressed air measurement.

    Read more
  • Digital Display Flow Meter for Liquids / Gases

    7000/8000 with RW3 option

    The digital display is a 2-wire loop powered flow meter with a built in wet/wet differential pressure sensor which provides a 4-20mA signal and scaled pulse output and large LCD display.

    Read more
  • Digital micromanometer

    AXD 620

    The Alnor Micromanometer AXD620 is a rugged, compact, comprehensive micromanometer that measures pressure. It can be used with pitot tubes to measure velocity and then calculate flow rates with user–input duct size and shape.

    Read more
  • AirPro Micromanometer

    AP800

    The AirPro® Micromanometer AP800 is a rugged, compact, configurable and high performing component of the AirPro Solutions platform. It is used in conjunction with AirPro® Mobile Application Software and user-defined feature sets.

    Read more
  • Airflow Meter/Micromanometer

    922

    The Fluke 922 helps you analyze airflow. Easily.

    Read more
  • Micromanomètre multifonctions haute précision

    EBT730

    The Alnor Micromanometer EBT730 is one of the most advanced, versatile, and easy to use micromanometers on the market today.

    Read more
  • Shortridge

    ADM-850L

    AIR FLOW• VELOCITY • PRESSURE • TEMPERATURE

    The ADM-850L Multimeter offers the unequaled accuracy and flexibility of the Shortridge Instruments AirData Multimeters, in a simplified model, and at a reduced cost.

    Read more
  • Handheld Digital Manometer

    477AV

    The Series 477AV Handheld Digital Manometer is now available with pressure, flow, and velocity measurements along with a number of other convenient features. The built-in air velocity and flow calculations provide accuracy and conserve time and error associated with manual calculations. Also featured on this unit are adjustable zero and span values for calibrating in the field, as well as a damping feature to compensate for the fluctuating of readings.

    Read more
  • Multiprobe Anemometer and Micromanometer

    MP210

    Kimo’s MP 210 micromanometer measures pressure, air velocity, airflow, temperature, tachometry, gas leak and carbon monoxide (up to 6 simultaneous measurements).

     

    Read more
  • Multifunction Sensor-Transmitter

    Si-C320

    For clean rooms, regulated environments and industrial VAC applications where a perfect regulation/monitoring of the air parameters is needed, our Si-C320 transmitters provide reliable measurements and allow you to achieve compliance with the strictest regulations.

    Read more
  • Pressure module For class 210 / 310 multi-function portables

    MPR

    For MP210 and AMI310 multifunction portables

    Kimo's pressure measuring modules consist of two pressure inputs and  one thermocouple input. There are five models available.

    Read more
  • Secondary Standard PRTs

    5626/5628

    Fluke Calibration's high-temp secondary standards fill the gap between affordable, but temperature-limited secondary PRTs (platinum resistance thermometers) and more expensive, highly accurate SPRTs (standard platinum resistance thermometers).

    Read more
  • Air velocity hot wire probes for portables KIMO class 210 and 310

    SF

    Kimo`s hot wire probes measure air velocity and temperature.

    For class 210 / 310 multi-function portables
    Read more
  • Vane Thermo-anemometer with integrated vane probe

    SI-VV3

    The palm-sized Sauermann Si-VV3 vane thermo-anemometer easily measures airflow, air velocity & temperature with its vane probe.

    Read more
  • Multifunction sensor with large electroluminescent display

    CA 310

    Kimo’s CA 310 contains a multifunction sensor with interchangeable probes and a large display. It can measure three parameters (for example humidity, temperature and pressure).

    Read more
  • Differential pressure and temperature sensor

    CP210-R

    The CP 210-R measures the differential pressure of air (and neutral gases), and is ideal for use in industrial and pharmaceutical applications.

    Read more
  • Air velocity and temperature sensor-transmitter

    CTV210-R

    Kimo’s CTV 210-R is a transmitter with hotwire probe measuring air velocity from 0 to 30 m/s and temperature from 0 to +50°C.

    Read more